100 Volts-slutsteg / slavsteg 90W
US SERIES 100V LINE SLAV FÖRSTÄRKARE
Ett 100V slutsteg för aplikationer där man inte klarar sig med kraften i sin 100V mixer förstärkare eller behöver flera zoner. Kan även anvädas i installationer där man vill blanda låg ohmigt system med 100V slinga. Är utrustad med RCA input och RCA vidarematning samt Master volym. Kan köras både i 100v och 8 Ohms läge.
100V slave amplifiers built into a half width 1U housing. In addition to RCA line input and output, the US amplifiers have a 100V input on removable screw terminals, which enables the amplifier to be connected in parallel with existing 100V speakers to extend the system. Mono output to either 100V line or an 8 ohm speaker load is connected via a separate removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.
- Supplied with hardware for rack-mounting 2 units
- 100V input for connection in parallel with existing 100V speakers
- 24V fire alarm mute contacts
- 100V line or 8 Ohms operation
- Power supply170-264Vac, 50Hz (IEC)
- Amplifier : constructionClass D + transformer output
- InputsLine (RCA), 100V (Euroblock +/-)
- Line output2 x RCA (mono)
- Speaker outputEuroblock terminals: 100V / 8 Ohms / Com
- Mute24V relay contacts
- THD<0.4% @ 1kHz
- Input impedance1k Ohms
- Input sensitivity-10dB (line)
- SNR80dB
- Frequency response100Hz - 18kHz
| | US60 | US90 |
|---|
| Output power : rms | 60W | 90W |
|---|
| Dimensions | 269 x 210 x 44mm | 330 x 210 x 44mm |
|---|
| Weight | 2.30kg | 2.40kg |
|---|