Accurate Audio Performance / Frequency Response
The XPRS1182S relies on an 18” ferrite woofer with a 3” voice coil with long excursion to produce low frequencies with paramount accuracy.
Offers a 40 Hz – 120 Hz frequency response and 130 dB maximum SPL; the subwoofers pack in the performance of a permanent install subwoofer with the compact mobility required by today’s mobile artists, performers and venues.
Specifications
Expand / Collapse all
Type | 18 inch active subwoofer |
---|
Amplifier Output | |
---|
Accessories | - XPRS1182S x 1 (not sold as a pair)
- Powerd cord
- Quick start guide
- Important Safety Precautions
|
---|
Supported voltages | 110 V to 240 V (50 Hz/60 Hz) |
---|
Power consumption | 800 W |
---|
Width | 661 mm |
---|
Height | 535 mm |
---|
Depth | 536.5 mm |
---|
Weight | 32.3 kg |
---|
Frequency Range | 40 – 120 Hz |
---|
DSP modes | - EQ Mode Select (3 DSP Preset Modes(Switch))
- LPF
- POLARITY
|
---|
DSP presets modes | |
---|
Maximum Sound Pressure | 130 dB |
---|
Inputs | - Left Mono (Combo)
- Right (Combo)
|
---|
Outputs | - Left Mono (XLR)
- Right (XLR)
|
---|
Driver | 18” ferrite LF cone driver |
---|
Finish | Black paint, Rubber feet |
---|
Handle | 2 (on both sides) |
---|
Pole socket | 35 mm socket |
---|
Enclosure | Plywood (TSCA) |
---|
Amplifier Protection | - Thermal limiting
- Digital compressor
|
---|
Driver Protection | Short circuit protection |
---|
Power unit Protection | - Primary AC mains overcurrent protection
- Primary AC mains overvoltage protection
|
---|
* The specifications and design of this product are subject to change without notice.